Aerospace Parts Cleaning Systems

Typhoon^®AWW Aircraft Wheel Cleaning System

The Typhoon®AWW aircraft wheel cleaning system is designed to clean up to 30 aircraft wheel hubs of any size in an 8-hour shift (1 wheel every 16 min.). This unique parts washer uses the latest aqueous cleaning technology complying with environmental regulations, to remove grease, rubber residues, dirt, and brake dust from wheel hubs prior to inspection or overhaul.

A base model uses recirculating, solvent free, hot alkaline aqueous solution sprayed on the wheel at high pressure to remove oil, grease, and dirt. At the same time, the rotating brush scrubs the external wheel surface to remove accumulated rubber on the bead seat area. The wheel is then freshwater rinsed and blow-off dried. Based on our experience, mechanical scrubbing is the most effective method to remove embedded rubber residues without solvent applications. To achieve similar results with water pressure only, it would require applying extensive pressure above 300psi, resulting in more system maintenance and shorter life span for system components.

The Proceco AWW aircraft wheel washer is a cost effective solution providing automated and effective cleaning process. The aqueous parts washer shown above is equipped with an optional automatic load and unload system to reduce handling and risk of injury. Other options such as higher jet pressure and slurry blast are available to tailor the aircraft wheel cleaning system to your needs.

Tubes Flushing Systems

The Proceco tube flusher is a top-loading batch-type parts washer designed to spray wash the exterior, flush out the interior, and air blow-off aerospace tube assemblies. The system cleans several tubes at the same time. A common manifold inside the spray cabinet is used to supply aqueous cleaning solution and rinse water for tube flushing. The parts are clamped onto a distribution manifold to flush the interior of the tubes. The tube cleaning system can be configured with optional features and multiple process stages to meet specific customer requirements.

Other Systems used in Aerospace Applications

	NDT Automated Lines
	Immersion Cleaning
	Ultrasonic Immersion Cleaning
	Turntable Cabinet Parts Washers