Canada/USA Toll Free: 800 978-6677
Mexico Toll Free: 800 514-6677
Tel International: +1 514 254-8494
 
High-Pressure Deburring
Standard Cleaning Systems
Custom Cleaning Systems


TYPHOON® SI
30-POINT CHECKLIST
Read for yourself why the TYPHOON® SI outlasts virtually every other immersion-spray cabinet washer.
CLICK HERE......


Spray Immersion


Spray Immersion
for Large Parts


TYPHOON® SI-1 and SI-2 Spray Immersion Washer

This compact and ergonomic parts washer, dubbed the TYPHOON® SI, is ideal for precision machine-parts aqueous cleaning. The SI conveniently installs into a manufacturing cell and handles a wide variety of complex small or medium parts inside standard baskets, or loaded via a custom-engineered Proceco fixture.

The SI comes complete with fully recirculated immersion wash and rinse. At the beginning of every wet-process stage, the rotating basket fixture is power-sprayed by V-jet spray nozzles filling the immersion tank. Rotation and spraying provide cleaning in immersion and complete removal of contamination when the basket is rotated out of the aqueous solution.

Spraying the parts without immersion, thus ensuring that they will not be recontaminated, finishes all wet-process stages. A high-pressure regenerative blower is also supplied to remove most of the water from the parts (optional heater available).

 



Spray Immersion


Spray Immersion
for Large Parts

 


TYPHOON® SI+ Spray Immersion Washer for Large Complex Parts

This larger version is designed for precision cleaning of large complex parts such as cylinder blocks or heads. The SI + features triple-action cleaning technology that combines high-impact spray, turbulent immersion with rotation, and forced flushing to remove machining oils and coolant, grease, and metal chips from newly machined or prior-to-rebuild parts. The system uses fully recirculated, filtered, hot aqueous cleaning solutions for maximum energy efficiency and minimal water usage.

Workpieces are loaded through a large cover or door onto a specifically engineered fixture. The fixture can be designed to receive single large parts, a multiple of smaller parts, or a combination of both. The Typhoon® SI+ can also process a large volume of small pieces simply by replacing the fixtures by baskets.

The Typhoon® SI+ is available in 3 sizes with options such as top or front loading, automatic part transfer, rinse stages, and sludge removal. The Typhoon® SI+ produces clean and dry parts at a minimal cost and can be configured to meet your specific needs.

 
Friday, May 09, 2008