USED PARTS WASHERS

Are you looking for quality parts washers at a fraction of the price? PROCECO has used parts washers and cleaning equipment for sale. PROCECO parts washers are built to last and achieve high cleaning performance year after year. Even with a few years of service, they still represent an excellent value for your money.

All pre-owned equipment offered by PROCECO:

  • Is meticulously inspected by PROCECO technicians
  • Is clean and in good condition
  • Can be purchased as-is
  • Can be adapted to meet your needs
  • Includes operation and maintenance user documentation
  • Is supported by PROCECO's Customer Service department

ÉCO-SMART® mechanical vapor-recompression (MVR) evaporators

ÉCO-SMART® ES-1500

Éco-Smart® MECHANICAL VAPOR-RECOMPRESSION (MVR) EVAPORATORS

A ZERO-DISCHARGE WASTEWATER RECLAMATION SYSTEM

The PROCECO Éco-Smart® mechanical vapor-recompression evaporator system is a low-energy evaporation method that generates a high-quality distillate ready to be re-used. The Éco-Smart® MVR does not use an electric, gas or steam heat source to generate the distillate; this makes it a more environmentally friendly and cost-effective alternative to conventional wastewater concentration technologies.

PROCECO Éco-Smart® MVR evaporators are at their best when evaporating large quantities of dilute solutions, such as the rinse water that is common to surface treatment, aqueous parts washing, liquid penetrant inspection or die casting. In most cases, the distillate meets or exceeds process water purity requirements and can be re-used without further treatment.

By adding an Éco-Smart® MVR to your cleaning process, you can recycle up to 98% of your industrial process water and significantly reduce your wastewater transportation and disposal costs, while also improving your process quality. By routing your cleaning solution to an Éco-Smart®, you create a closed loop – extracting dissolved contaminants and replenishing your solution with clean, recycled water.

Exclusive Éco-Smart® Features

  • Efficient heat recovery allowing for a very low specific energy (see performance).
  • Effective natural circulation assures efficient wastewater concentration.
  • With exception to the compressor, the equipment uses no additional pumps and relies strictly on natural circulation created by the vacuum distillation process.
  • A multi-stage cyclone separator purifies the water vapor to produce a high quality distillate and prevents mineral scaling of the compressor internals.
  • The programmable logic controller (PLC) provides versatility; the unit can be integrated into an existing system or operated independently.
  • Fully automatic Allen Bradley PLC control system for unmanned operation.
  • The process control system monitors varying operating parameters and compensates to ensure reliable operation.
  • The vertical heat exchanger arrangement ensures low maintenance costs by allowing particles to settle in the concentrate tank rather than the heat transfer surfaces.
  • The distillate collection tank features a cross flow heat exchanger to pre-heat incoming wastewater.
  • Automatic foam detection with PLC controlled anti-foam dosing prevents foam build-up and eventual system malfunction.
  • The system is housed in an acoustically and thermally insulated enclosure, with detachable panels, providing spacious and rapid maintenance access.
  • The system is equipped with dry contacts for connection to customer's level controls; wastewater, distillate output, and concentrate output.
  • Year of Construction: 2016
  • Capacity (approximately) 1500 gpd
  • Evaporation temperature 188°F
  • Distilled water outflow temperature 130-150°F
  • Wastewater feed maximum 20°C
  • Startup time between concentration cycles 30-45 min
  • Minimum wastewater pH 7
  • Compressor motor 30 hp (7.5 kW)
  • Compressed air consumption (peak demand) 10 scfm
  • Compressed air consumption (effective) < 5 scfm
  • Sound level in 1 m distance (approx.) 80 to 85 dBa
  • Specific energy consumption 0.24 kW/gal
  • Effective power consumption 18 kW
  • Weight 4,000 lbs
  • Dimensions 110"L x 60"W x 110"H
Used TYPHOON®-SI Spray and Immersion Industrial Parts Washer

TYPHOON-SI®

The TYPHOON®-SI is a compact, ergonomically-designed parts washer, ideal for precision cleaning of machined components. The TYPHOON®-SI parts washer installs easily and conveniently into a manufacturing cell and can handle a wide variety of complex, small- or medium-size parts using standard Kaydon baskets or custom-engineered PROCECO holding fixtures.

The TYPHOON®-SI parts washer features fully recirculated, aqueous immersion wash and rinse stages. At the beginning of every wet-process stage, V-jet spray nozzles power spray the rotating basket fixture while also filling the immersion tank. Basket rotation during immersion and power-spraying ensures precision cleaning and complete removal of contamination. Following all wet-process stages, the nozzles power spray the parts without immersion, thereby ensuring that the part surfaces are not re-contaminated.

Key Benefits

  • Ideal for tough-to-clean parts with complex geometries and intricate bores
  • Fully recirculating process: each stage includes a dedicated tank and process pump
  • High turbulation created by power spray and immersion
  • Compact / ergonomic design with all services at the rear of the machine
  • Multiple programs for different parts and cleaning processes
  • PLC controlled
  • Power spray, immersion, wash and rinse cycle for exceptional cleaning results
  • One-piece, polished stainless-steel 304 construction for chemical resistance and state-of-the-art appearance
  • Ergonomic design Improves productivity by reducing strain on operators
  • High-pressure regenerative blow-off dries parts thoroughly
  • Minimal cabinet wetted surface area reduces cross contamination of cleaning solution
  • Chip basket accessible through hinged covers filters solution before it returns to tank
  • Service connections and equipment located at rear, perfect for lean manufacturing cells
  • Programmable logic controller with touchscreen HMI allows you to set multiple programs for different parts and cleaning processes
  • Year of Construction: 2018
  • Approx. shipping weight: 2,500 lbs.
  • Machine dimensions: 54" W x 82" L x 75" H
  • Cleaning envelope: 18"diameter x 18" L
  • Standard baskets: 2 included
  • Immersion capacity: 22 US gal
  • Max. solution operating temp: 180℉ (80℃) maximum
  • Wash and rinse stage pump capacity: 45 USgal/min @ 35 psi, 3 hp – 3600 rpm
  • Wash and rinse stage solution tank capacity: 75 USgal
  • Wash and rinse stage heating capacity: 24 kW
  • High-impact blow-off stage blower capacity: 165 scfm @ 70" w.c.
  • High-impact blow-off stage blower motor: 4.6 hp – 3600 rpm
  • Required compressed air supply: 5 scfm @ 80 -120 psi
  • Required power supply: 575V / 3-phase / 60 Hz