BEARING WASHERS AND CLEANING SYSTEMS

  • PROCECO offers aqueous bearing washing systems to wash axle bearing components and bearing boxes. All cleaning systems use hot, recirculated, water-based cleaning solutions at high pump volume, spray pressure, and temperature.
  • The multi-stage cleaning process typically consists of a high-pressure and high-temperature pre-cleaning stage that will remove all the grease from the bearings, followed by an alkaline solution cleaning stage, followed by a water rinse stage with rust inhibitor. The grease removed from the bearings will be automatically and continuously extracted from the tank for disposal by means of a grease skimmer system. This system offers major efficiencies in terms of detergent consumption and extension of intervals between tank clean-out.
  • For high-production cleaning, in-line, continuous flow conveyor washing systems are offered. Bearing components such as bearing cones, spacers, inner and outer races, caps and bolts in trays, etc., are placed directly on the conveyor belt and transported through the multi-stage cleaning process: grease pre-cleaning detergent cleaning rinsing/rust inhibiting blow-off drying.
    Production rate: up to 60 bearings per hour.
  • For lower production rates, standard TYPHOON®-HD batch-type cabinet turntable washers are offered specially adapted to this application. Operators load components of multiple bearing sets onto specially designed loading fixtures, optimally exposing all surfaces to the high-pressure cleaning jets.
    Production rate: up to 50 bearings per hour (HD 62 x 48).
  • Bearing boxes can also be cleaned in standard TYPHOON®-HD batch-type cabinet turntable washers specially adapted with center nozzle pipes. Operators place bearing boxes directly on the turntable to be perfectly cleaned inside and out.
Request a quote

PARTS WASHERS

PROCECO TYPHOON®-HD turntable spray cabinet washers are configured for railway bearings

TYPHOON®-HD

PROCECO TYPHOON®-HD turntable spray cabinet washers are configured for railway bearings

PROCECO TYPHOON®-HD turntable spray cabinet washers are designed to clean large parts placed directly on a swing-out turntable. This heavy-duty industrial parts washer combines pressure, heat, and an aqueous cleaning solution to clean and degrease parts to your specification within minutes.

learn more
Heavy-duty conveyor washer for heavy contaminated parts and components

TYPHOON® MB-H

Heavy-duty conveyor washer for heavy contaminated parts and components

The PROCECO TYPHOON® MB-H is a heavy-duty power-spray belt parts washer designed for automatic processing and cleaning of heavily contaminated and/or heavy components. Inline conveyor washers clean railway axle bearings with the help of high-pressure spray jets of and heated aqueous solution.

learn more

Contact a solution expert

PROCECO develops aqueous cleaning systems that go beyond cleaning, by seamlessly integrating a wide range of processes and features that dramatically improve your productivity and profitability.